|
| ||||||||||||||
|
| ||||||||||||||
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Channel Master moulded dishes by AndrewsNote: Channel Master items are Special Order items from America so delivery is typically 6 - 8 weeks. | |
|
| UK mainland delivery only (due to carriage cost). |
|
| *Note: "SMC" = Sheet Moulded Compound with embedded metal mesh The 90cm and 1.2m dishes can be motorised only if you use the polar mount instead of an AZ/EL mount. You will also need a jack arm (linear motor) and a suitable positioner to control it. See illustration on left. You WILL need to order either an AZ/EL mount or a polar mount (but not both). You will also need a suitable 3" diameter pole or mount. Unfortunately, we can no longer obtain the polar mount. |
  AZ/EL mount (upside down) | UK mainland delivery only (due to carriage cost). |
| If you have only the 1.0m dish face you will need to order the LNB bracket kit and the kit of 3 "Feed Legs" which support it. | Spare Parts 3 rods, bent, with internal thread |
|
| |
|
|
Plastic mouldings with bolts Note: The threaded brass inserts may need to be filed down so that the two "bridge" mouldings can grip the LNB properly. |
|
| |
|
| UK mainland delivery only (due to carriage cost). |
 | *Note: "SMC" = Sheet Moulded Compound with embedded metal mesh The 90cm and 1.2m dishes can be motorised only if you use the polar mount instead of an AZ/EL mount. You will also need a jack arm (linear motor) and a suitable positioner to control it. See illustration on left. You WILL need to order either an AZ/EL mount or a polar mount (but not both). You will also need a suitable 3" diameter pole or mount. Unfortunately, we can no longer obtain the polar mount. |
| If you have only the 1.2m dish face you will need to order the LNB bracket kit and the kit of 3 "Feed Legs" which support it. | Spare Parts |