|
| ||||||||||||||
|
| ||||||||||||||
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||
|
| ||||||||||||||
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
80cm dish with choice of accessoriesUK mainland delivery only (due to carriage cost). | |
|
| DAP800 (see seaside dish) |
|
| Solid 80cm dark grey dish for pole-mounting - choose STEEL or ALUMINIUM below. For LNBs type quantity in the Qty box or leave it as zero. You can add different LNBs from page 1 if you don't want the cheapest listed here. LNB Brackets are slotted to allow LNBs to be positioned correctly. Click HERE for more info. You may also wish to order cable, cable clips, "F" connectors, self amalg. tape, meter, compass, bolts, drill, (a 2" pole and T + K brackets if there's a roof overhang - see hardware page 2a). |
| |
| Replacement single LNB holder for Orbital 80cm and 1m dishes. | |
|
| One LNB bracket gives approximately 3 to 9 degrees separation. The minimum depends on the width of your LNB. So a 9 degree separation should get you (for example) Astra 1 at 19'E and Astra 2 at 28.2'E. Or Hot bird at 13'E and Astra 1 at 19.2'E. To get Hot Bird and Astra 2 you will need two brackets. Please note that the plastic moulding that fits on to the Orbital dish arm (<-- red arrow) is not part of this kit as it comes with the Orbital dish itself. Unfortunately, we can not tell you whether these brackets will fit any other dish, even if you tell us the make, model and send a life-size photograph. |
