Standard Universal LNBs

- (not for Sky minidish)

Contents

Rubber boots 40mm LNB bracket for minidish Single-output universal 40mm LNBs Twin-output universal 40mm LNB Quad-output universal 40mm LNB Quattro universal 40mm LNB OCTO 8-output universal 40mm LNB Monobloc dual satellite LNB Dual 5 degree LNB Invacom 0.3dB universal 40mm LNBs C120 flange Invacom universal LNBs

The LNBs on this page are NOT suitable for Sky minidishes. (See Page 1 for Sky minidish LNBs)

Note: Photos of LNBs on our web site are for illustration only. Manufacturers change designs so frequently that we don't know what will be supplied to us from week to week. In some cases, brackets may need to be modified in order for LNBs to fit. Our Technical department will assist you as much as possible if you provide photographs to demonstrate any problems.

Our "universal" LNBs are divided into three types:

• 1. Sky minidish "spigot" fixing. See page 1
• 2. Standard 40mm neck clamp type. This page
• 3. C120 circular flange type. This page

Please note that our LNBs are not suitable for American DirecTV systems

 Universal 40mm LNBs for standard dishes

Flexible Rubber Boot

Weatherproof your LNB connection! SatCure's unique flexible Rubber Boot is suitable for single-, twin-, quad-output or OCTO LNB "F" connectors - essential to keep out moisture. Automatic discount for 10 or more (60p), 100 or more (55p), 1000 or more (50p). Slide it up the cable to weatherproof the "F" connector. MORE INFO

UV resistant and guaranteed for 10 years if used with silicone grease as described.

Economy rubber boot pack for the cheapskates! This low cost neoprene boot is available in a pack of 4 for just 99p. We can't guarantee it will last like our flexible boot (above) but it's cheap. MORE INFO

TRX99ZA 40mm LNB bracket with adapter to fit Sky minidish This bracket is normally used with a Triax minidish but fits other Sky minidishes and may give reasonable results, provided that the angle is correct. We recommend that you slide the adapter fully into the dish arm. Then slide the LNB bracket into it and stop when you get maximum signal reading. Adjust the LNB "skew" (rotational position) for maximum signal quality before tightening the small bolt at the top. We can not guarantee good results so please don't ask "will this fit my dish/LNB?" We don't know. Dish arm hole dimensions: W = 29mm H = 18mm

£2.99 Qty

AP0204806 40mm LNB bracket with adapter to fit Sky minidish This bracket is supplied by Fortecstar and may give reasonable results on a Sky minidish, provided that the angle is correct. We recommend that you slide the adapter fully into the dish arm. Then slide the LNB bracket into it and stop when you get maximum signal reading. Adjust the LNB "skew" (rotational position) for maximum signal quality before tightening the small bolt at the top. We can not guarantee good results so please don't ask "will this fit my dish/LNB?" We don't know. Dish arm hole dimensions: W = 28mm H = 19mm

£5.49 Qty

Single-output LNBs

Note: single-output LNBs are seldom used nowadays unless you have a specific reason - such as squeezing several LNBs together on one dish. Most people keep their options open by fitting at least a quad-output LNB, which provides four separate feeds for (say) four satellite TV receivers or two Sky+ or HD PVRs. (You can't split an LNB feed so be sure to install an LNB with as many outputs as you are likely to need in the future.)

Inverto black premium single-output

Inverto black premium single-output universal LNB with standard 40mm neck (LNB10)

• 0.2dB minimum noise figure
• LNB10 weighs 150 gms in box

Inverto black ULTRA single-output universal LNB with LONG 40mm neck (LNB10)

• 0.2dB minimum noise figure
• LNBULTRA weighs 170 gms in box
• Low Power consumption
• High Cross pol. performance
• Marginal Phase Noise
• Exceptionally long focal adjustment

MTI Highline, high gain* 70dB (max), 65dB (typ), low noise (LNB31)

• Single-output universal LNB with standard 40mm neck
• 0.2dB typical noise figure

*High gain might be better for a long cable run.

Possibly the narrowest 40mm LNB in the world!

BS1R9EL100A LNB is only 43mm wide at its widest point. Ideal for close-spaced satellites.

Single-output universal LNB with standard 40mm neck

LNB weighs 90 gms in box. More info.

---

Twin-Output LNB

Inverto black premium twin-output

Inverto black premium twin-output universal LNB with standard 40mm neck (LNB12)

0.2dB minimum noise figure

LNB12 weighs 230 gms in box

---

Quad-Output LNB

Inverto quad-output

LNB quad

Inverto quad-output universal LNB with standard 40mm neck (LNB19)

0.4dB typical noise figure

LNB19 weighs Approx 400gms in box

---

Quattro LNB

Please read the LNB Information page before buying any LNB !

Inverto black premium Quattro

Inverto black premium Quattro universal LNB with standard 40mm neck (LNB15)

0.4dB minimum noise figure

LNB15 weighs 350 gms in box

Quattro LNBs are designed to feed a multiswitch and connected with 4 coloured cables.

With a Quattro LNB you can find the satellite (with a satfinder meter) using the H Low feed (normally coded green on the Multiswitch).

---

Octo LNB

Inverto black premium OCTO

Inverto black premium OCTO 8-output LNB to feed up to eight separate receivers. (LNB17)

Standard 40mm fitting.

May differ from photo.

---

Dual LNBs

Inverto 6 degree Monoblock

Inverto Monoblock 6 degree dual LNB (LNB55)

• Suitable for receiving Astra-1 19'E and Hotbird 13'E.
• (Or Sirius and Thor within the footprint).

May differ from photo.

---

Dual 5 degree

FE8 Dual LNB with 5 degree separation.
This is two "universal" LNBs in one housing.
Each LNB has its own connection.

Originally designed for receiving signals from 28'E and 33'E simultaneously.

0.3dB INVACOM LNBs

Invacom Single-Output

LNB40

Universal Invacom single-output LNB 0.3dB typical (0.6dB max) with 40mm neck

LNB41

Universal Invacom twin-output LNB 0.3dB typical (0.6dB max) with 40mm neck

LNB42 (QDH-031)

Universal Invacom quad-output LNB 0.3dB typical (0.6dB max) with 40mm neck.

Out and out BEST performer for fringe area reception!

LNB43

Universal Invacom quattro LNB 0.3dB typical (0.6dB max) with 40mm neck.

For use with multiswitch only.

C120 Flange LNBs

Invacom Single-Output C120

LNB60

Universal Invacom single-output LNB 0.3dB typical (0.6dB max) with C120 flange

LNB61

Universal Invacom twin-output LNB 0.3dB typical (0.6dB max) with C120 flange

LNB62 (QDF-031)

Universal Invacom quad-output LNB 0.3dB typical (0.6dB max) with C120 flange

LNB63

Universal Invacom quattro LNB 0.3dB typical (0.6dB max) with C120 flange

For use with multiswitch only.