|
 Choose delivery method |  |
|
| | Extend your dish cable (indoor use) Extend LNB cable with our Double-shielded RG6 coaxial lead 5 metres long fitted with male "F" plug at each end. Use the threaded "F" barrel (below) to join cables (tick box if required). Other lengths can be made up on request. See page 8 for more choice of cable and length. If you need to pass the lead through a hole you can simply unscrew one "F" plug then screw it back on afterwards. |
| 
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
| Also see page 8 for high quality extension cables (suitable for Sky, Sky+, Virgin, Telewest, NTL etc.) |
| | Please look at the other connectors, adapters and leads below! |
|
| Choose delivery method | |
Note: Ready-made leads The ready-made leads, below, are very flexible and convenient to use. However none of them is as well shielded as the FF leads above and we recommend that, for more critical applications where interference could be a problem, you use FF leads* or make your own leads by ordering cable from page 8 and TV plugs from this page. * A TV-toF adapter may be required. |
 | 010-8171 Digital flexible coax lead colour white. Digital flexible coax lead with gold-flashed male "F" connector moulded at each end. Ferrite cores fitted to reduce back EMF and residual oscillations. A TV-toF adapter may be required. Approx. 148cm (58") in length. 75 Ohm impedance. See note above
|
 | 100-00137 Simple flexible coax lead colour BLACK approx 1m long. Coax lead approx 1 metre with fitted male "F" connector moulded at each end. Suitable for connecting LNB switch or similar. (As supplied with every satmeter). A TV-toF adapter may be required. See note above
|
 | |
|
| Choose delivery method | |
|
Highest quality RF fly-leads/TV extension leads |
| 
| Hand-made in the UK using sturdy WF100 foam-dielectric cable with copper foil and copper braid screening. Nickel-plated brass male TV plugs are soldered for reliable DC connection to avoid problems with amplifiers and remote extender eyes which are cable-powered from a Digibox or power supply. You won't find better than these!
 Note: this is NOT cheap, thin RG59. It is double-screened WF100 with foam-dielectric.
Click for more info. |
| Choose colour/length 
| |
Need an 'F' plug on one end and a TV plug on the other? |
| | 
Note: this is NOT cheap, thin RG59. It is double-screened WF100 with foam-dielectric.
Click for more info.
|
|  Choose colour/length
| |
|
|
| 
| |
 | |
| | |
| Choose delivery method | |
|
| 
| SatCure's unique flexible Rubber Boot is suitable for single-, twin-, quad-output or OCTO LNBs. Automatic discount for 10 or more (60p), 100 or more (55p), 1000 or more (50p). MORE INFO See "F" connectors below | | 
| Cable Tidy grommet If you can avoid using a wall socket your signal will be better. Tidy the hole in your wall by tapping this plastic plug into it. 7mm hole through centre. Requires 10mm hole in wall. Choose translucent white plastic or black.
| | 
 | Cable entry cover Hides untidy holes drilled in the wall. Brown (picture) or White plastic. Can be glued in place with silicone adhesive.
Size: typically 11cm x 11cm x 3cm (may vary because we buy from various manufacturers).
| | 
| AMALG2P - a cheaper alternative Self Amalgamating tape just 2p per inch! Remove plastic backing, stretch it to twice its length and it welds to itself as you bind it. Essential for waterproofing "F" connector joints outside. Good for car radiator hose repairs, too! 10 inch length 20p or full reel £4.95.
Typical LNB connection needs 5 inches.
(Rubber boots for F connectors available - see connector page) | |
|
Twist-on 'F' connector plugs (threaded) fplug All 'F' plug nuts are the same but the cable entry size varies. The "F" plugs that we stock have been carefully selected to match the cable that we supply. (Silicone grease should be applied. No special tools necessary. No soldering. You will require strong fingers or pliers.) So the RG6FPLUG is for SATDS cable, which is very soft and requires a fractionally tighter fit. The H109FPLUG suits WC100 and the obsolete CT100 and H109F cables. The WF1FPLUG is for WF100 cable, which is foam-filled and requires the slackest fitting. So the internal thread of this plug is the widest diameter of the three. The difference in internal diameter is a fraction of a millimetre and virtually impossible to measure but it's important to get it right. We know of no other supplier that bothers to ensure that the plug fits the cable. If you are in any doubt, please order all three and try them. They aren't exactly expensive! We also supply coloured cable suitable for Sky, Freeview, Virgin. We offer cables cut to standard lengths. If you need an in-between size we can not help. (Originally we were offering custom lengths but this led to mistakes so we no longer offer this option.) You can order as many plugs as you like, either individually up to 99, or in packs of 100. We do not stock crimp-on connectors. (see F connector instructions). |
|
 Image may not match actual product | Threaded "F" plug (narrow) for RG6/SATDS satellite cable with aluminium foil screen. Can be used with TV-F adapter (above). Suitable for all 7mm diameter cable on page 8 of our catalogue. (see F connector instructions). Also suitable for 17 VATC French spec. cable. No special tools necessary. You will require strong fingers or pliers.
|
|
|
| 
Image may not match actual product
| Threaded "F" plug (medium) for WC100/H109F/CT100* satellite cable. Can be used with TV-F adapter (above). Suitable for all 7mm diameter cable on page 8 of our catalogue. (see F connector instructions ). You will require strong fingers or pliers. *H109F and CT100 cable is no longer manufactured.
|
|
|
|
Image may not match actual product
| Threaded "F" plug (wide) for WF100 satellite cable. Can be used with TV-F adapter (above). Suitable for all 7mm diameter cable on page 8 of our catalogue. (see F connector instructions ). You will require strong fingers or pliers.
|
|
|
Image may not match actual product | SPECIAL F plug for 4.8mm WF65 and CT63* "shotgun" cable only, on page 8 of our catalogue. (see F connector instructions ). You will require strong fingers or pliers.
*CT63 is no longer manufactured.
|
|
|
 | Threaded (twist-on) F plug with reduction pin insert and insulator for very low-loss WF125 cable or CT125*. Note: Our rubber boot will not fit over this connector. Please use self-amalgamating tape to seal it if used outdoors. Silicone grease must be used when assembling this plug kit. Kit comprises plug body, plastic insert and pin. A link to your comprehensive assembly instructions will be provided in your "Keep-me" email order confirmation message.
You will require strong fingers or pliers. *CT125 cable is no longer manufactured. |
|
|
 | A09351 75 Ohm "F" terminator for unused inputs. |
|
|
 | 090-3636 ( H090-3636 ) "F" push-on adapter (converts an 'F' plug to push-fit for easy disconnection - ideal for satellite finder meters or caravan quick-disconnect). (see F connector instructions ). Select "F" plugs to suit your cable. (Tight fit so use silicone grease.)
|
 
| 090-3078 ( H090-3078 ) Threaded "F" barrel coupler (female-female) to join cables or to fit to a wall plate or to convert a standard F plug to female.
Select "F" plugs to suit your cable. (see F connector instructions ).
Integral hex shoulder. Nuts supplied free with order on request if required for a wall plate. Tick box below.
|
 | 090-4333 TV to F adapter Screws onto an "F" connector so you can plug it into your Aerial input socket on satellite receiver or TV. Allows you to use double-screened coax cable like FF leads above! Use it with our FF leads to make a high quality extension TV lead or RF lead.
Disadvantage: it makes a rather long plug.
|
 | Right angle F adapter is used where you prefer the cable to hang straight down or where space is restricted. Simply screw it into an "F" connector. |
| Choose delivery method | |
|
 | Labgear PSC050. This is a 5-way earth-bond plate comprising a metal plate bent at right angles with two screw holes and five 090-3078 Threaded "F" barrel fitted. Ideal for using as a distribution plate for up to 5 LNB cables where, perhaps, you need to select 1 out of up to 5 for watching various satellites. More efficient than an LNB switch (virtually no losses compared with typically 4dB for a switch). Use with 090-3636 "F" push-on adapter and Select "F" plugs to suit your cable. Also recommended for lightning protection at the point of entry into the building. (Saw off what you don't need). |
|
|
|
|
 | An extremely thin ribbon cable with threaded "F" connector each end for passing through narrow gaps such as windows and doors. The length of ribbon between connectors is 170mm. No measurable loss of signal or quality. Suitable for Digital satellite as well as Analogue or ordinary TV. Select "F" plugs to suit your cable.
|
| Choose delivery method | |
|
 | COLC - female barrel connector (to join two male TV plugs)
Disadvantage: may be too loose or too tight on some plugs and can't be adjusted. Plastic may need to be cut away for some applications.
|
|
|
| 
| COLCM - male/female adapter (to convert a male TV plug). It has two female ends.
|
|
|
|
| COLCF - female/male adapter (to convert a female TV plug). It has two male ends.
|
|
|
 | |
|
|
 | |
|
|
 | |
| Choose delivery method | |
|
 | APCOAX1 male TV plug UHF male TV plug with screw fitting. No soldering required. Has a metal screw cap and metal claw bush . (Ensure screening braid is clamped firmly with claw bush.)
|
 | APCOAX3 male TV plug UHF male TV plug with screw fitting. No soldering required. Has a plastic screw cap assembly .(Ensure screening braid is clamped firmly in screw cap.)
|
 | CN04247 female TV plug UHF female TV plug with screw fitting. No soldering required. Plastic cap assembly. (Ensure screening braid is clamped firmly in half-shells.)
|
| Choose delivery method | |
|
Send this page address - 
