Quad Sky LNBs

Sky LNBs are designed to fit certain dishes. Some are no longer available. We supply details of the "finger" or "spigot" dimensions so you can match them to your dish. Please measure your dish arm internal dimensions and choose an appropriate LNB. If you don't know the dish type and spigot dimensions, we will not be able to answer "will it fit" questions. Note: even if an LNB fits, you may have to adjust its distance from the dish so that it gives the highest signal. (Optimising the focal position.) It may be possible to achieve this only by using a wooden "splint" or heatshrink tubing to hold the LNB in the correct position.

If you need to be certain that an LNB will fit and is optimised for the dish, please buy dish and LNB together as a kit.

Fitting instructions - click here

Quad-output universal Sky LNB

(Rubber boots NOT needed). Feed four separate Sky Digiboxes or two "Sky Plus" Digiboxes.

Bracket fits over the mk4 minidish arm and is secured with a plastic pin. See notes below.

Fitting instructions - click here - also see our special offer upgrade kits.

Tick the box if you need the 28 x 18.5mm adapter for a MK2 or MK3 dish.

Adapter for MK2/MK3 Sky minidishes.
Spigot dimensions: 28 x 18.5mm.

Quad-output universal Sky LNB S819010705

Spigot dimensions 23 x 10mm approx.
With adapter: 28 x 18.5mm approx.

for older mk1 Sky minidishes. (Rubber boots NOT needed). Limited supply available.

Especially suitable for older ChannelMaster Sky minidishes having a Grundig "G" type LNB such as G88.

Sorry, none left

Q. I have a dish like this one. Where can I get an LNB or adapter?
A. Sorry, we can't help. The only option we can offer you is a new dish and LNB.

Note: Sky minidishes manufactured after April 2009 have a different LNB attachment method. the arm is 27mm wide and the LNB bracket fits over the top of it. This type of LNB will fit a MK2 or MK3 dish if you order the adapter.