click here for site map page


home

information

catalog

technical

search

email

forum

terms

 

Triax-link

This system is OBSOLETE. Some parts are still available for replacement purposes only (see below). Items without an "Add to Cart" button are NOT available.

The Triax-link systems are used to send remote control signals back down the coaxial cable that feeds a second TV set to control whatever equipment is sending the picture and sound. It's ideal for Freeview terrestrial, Satellite, VCR and DVD. Fully screened coaxial cable is recommended but the system will often work with your existing cable. These are not wireless systems. These are NOT compatible with Handylink, "SkyLink" (TV-link, Digilink, SLXlink etc.)

Please take time to download and read the information carefully. Once you understand which parts you need, you can place your order by adding the items to the Shopping Cart. There are more remote extender systems on page 3.

Send this page address - CLICK HERE - to a friend !

 DOWNLOAD information about Triax-link remote extender systems (430k PDF file)

Windows users should "right click" a DOWNLOAD link above and choose "save target as" to save the PDF file without launching Acrobat Reader. If you "left click" then Acrobat Reader may launch and act as a "helper" for your browser, preventing the file from being saved in its original form. Mac Users should "ctrl-click".

If you do not have "Acrobat Reader" you will also need to download that from here:-
http://www.adobe.com/products/acrobat/readstep.html Free

Picture shows power supply (base unit) alone.Triax-Link basic kit (comprises power supply with IR transmitter 339705 and IR receiver 339702 as below). NOTE: all units have threaded "F" connectors and require "F" plugs for connection. Supplied with full instructions in English and several other languages.

OBSOLETE

Additional transmitter button 339705 (one supplied with kit) has a 2 metre lead and jack plug for connecting to base unit. The jack plug will fit through a 9mm diameter hole. The button has a transparent adhesive pad that will allow it to be stuck to a flat surface. (Peel off protective paper disc). It will operate up to a metre away from the equipment (possibly even further away in some cases). Button is bi-directional - can be used either way round.

OBSOLETE

Additional IR receiver 339702 (one supplied with kit) can be fitted to side of TV set with foam adhesive sticky pad (supplied). Note: some TV sets create electrical interference which may cause problems. Be prepared to fit it away from the TV set if necessary.

OBSOLETE

Choose delivery method

2 way amplifier can be fitted in the roof space and used to feed two IR receivers 339702 (for two TV sets if required).

OBSOLETE

 In some cases the coaxial cable is short enough to allow two IR receivers 339702 to be used without amplification.

OBSOLETE

Choose delivery method


Sketch shows the simplest layout