 Cable Decouplers DC Blockers If your "SkyLink" doesn't work while connected to your TV set aerial socket but does work when you disconnect it from your TV and just hold the connector close to the aerial socket, then one of our Decoupler systems should solve your problem. |
| Pre-made decoupled cable using WF65-1 Connects between Sky "magic eye" and TV |
| Black or white thin flexible cable with male TV plugs  | Solves earth-loop problems with "magic-eyes" etc. Decouples outer screen. |
| |
| Alternative DC1 inserter on page 3 will decouple the inner core and also let you connect power to it. Or you can make your own decoupler to decouple the outer screen. | |
| |
| Connect the decoupler between the TV aerial socket and the tvLINK (or similar magic eye) SkyLink extender. | |
| Alternative This one is a small barrel with a threaded "F" screw connection each end. Fit it into a coaxial lead between the "SkyLink" and TV aerial socket. Be sure to order cable and plugs if required* See MORE INFO. See our technical page for "F" plug fitting instructions. *We can supply cable with 'F' plug and TV plug fitted, separately. Order this type if you need to decouple the inner core wire. (If uncertain, don't order this.) |
|  | This Decoupler needs two coaxial cables (not supplied - order separately). Requires F connectors. You will need to make up your own cables or buy ours from page 7 (see below). Decouples inner core. |
| The decoupler is shown above connected to two short cables (not supplied). Each cable has an "F" connector plug at one end and a male TV (IEC) plug at the other. You can make up your own cables or you can order them from page 7 of our on-line catalogue. |
| |
| Send this page address - CLICK HERE - to a friend ! ©2004-2012 SatCure |