| Sky-HD uses a new design of Slim line remote control. The Default code pre-programmed into the RCU is now for Phillips and is (0)065. Sky HD The RCU is programmed in the usual manner using either the instructions in the Digital Installation Manual or via the Sky Customer Service option in the Interactive on-screen menu. This Revision 8 Remote contains codes for many recent model TFT and plasma screens but we don't have a complete list. We ask for your help in compiling the list, below. The Sky HD RCU is in stock. Click HERE. The HD remote by default works ONLY the SKY-HD box. If you punch the required button sequence it will then control the HD box AND the SKY+ box because the Sky-HD box recognises both sets of codes: Press the TV button. Press and hold SELECT and i together until the LED flashes twice. Press the number button 1 and then press SELECT. Note: To re-programme the RCU for Sky HD box operation, repeat the above process pressing the 2 button in step three. Keep pressing HELP and waiting a few seconds until you find the correct command that activates the AV source you require then press SELECT. The HELP button will now directly activate the chosen AV source instead of toggling through the alternative options to reach it. There are 18 AV source commands to be tried before the RCU blinks 3 times to indicate it is out of options. The Sky Guide buttons (SKY, tv guide, box office, services & interactive) can now be directed to use the same AV source as the newly programmed HELP button. Press SELECT and GREEN until LED flashes twice. Press HELP then SELECT and the LED will flash Twice. The Sky Guide buttons will now instruct the TV to switch to the desired AV source and the RCU will be in Sky Mode. To enter a code in the Sky HD remote: - Press TV.
- Hold Down SELECT and 0 (double-blink).
- enter the numbers (double-blink).
- Then SELECT and 1 (double-blink).
Or To enter the desired code on your Sky HD Remote:- - Press TV
- Press Select and the Red button until it blinks twice
- Press TV again
- Enter 4 digit code
- Press power button.
Codes for Lexsor 1224 or 1196 Codes for LG 0037, 0056, 0060, 0065, 0080, 0081, 0125, 0137, 0178, 0191, 0204, 0244, 0245, 0275, 0318, 0389, 0391, 0398, 0405, 0459, 0502, 0742, 1146, 1367 NEW LIST Recent email contributions: Note: SatCure can't guarantee the accuracy of these contributions, nor answer questions about them. We have no other information. Send us your new code if it's not listed on this page. (We thank those kind people who take the trouble to share this information with others). To see the very latest codes here, be sure to click RELOAD or REFRESH in your browser menu NOW! |