Omnisat Dish Installation

Please DO inspect the dish assembly on delivery. If there is a problem please REJECT the whole delivery so you don't have to pay for return postage. Cosmetic faults, such as scratched paint, are deemed acceptable because we advise you to paint all parts (except the LNB cap that faces the dish) to protect them from the effects of sun and rain. Matt paint is recommended.

Dents and distortion to the face of the dish (no matter how slight) are not acceptable and you should reject any delivery where there is such damage. Slight rim damage is usually permissible if it does not affect the dish face.

If any parts are missing, please contact our SALES department using the email form and state which parts are missing.

Omnisat Dish Installation

The Omnisat Semitronic (B2555) is a semi-automatic system with a 80 cm x 66 cm diameter elliptical satellite dish, universal LNB, control box, cable and fixing accessories. The control box requires a 12/24V d.c. power supply to automatically raise the dish to the desired azimuth (vertical alignment). Horizontal alignment is carried out manually by rotating the through the roof mast.

Features elliptical satellite dish (H: 66 cm W: 80 cm), universal LNB and control box

  • Elliptical satellite dish for improved digital satellite reception throughout Europe
  • LNB feed horn specifically designed to match dish for optimum reception
  • Control box requires a 12/24V d.c. power supply to automatically raise the dish to the desired elevation
  • Digital elevation readout
  • Last memory elevation feature stores any favoured position for ease of dish realignment
  • Azimuth adjustment by rotating the mast
  • Automatically folds down to 21 cm
  • Locks into position for travelling, protecting the dish from dust and dirt
  • Motor overload protection
  • Auto power-off after 2 minutes
  • Watertight motor and motor housing for permanent mounting to the Semitronic Omnimast
  • Height/Weight: 21 cm/11.6 kg
  • Power Requirement: 12/24V
  • Power Consumption: Max 1.5A (18 watt
  • Universal LNB: 10,70-12,75 GHz
  • LNB Noise Figure: 0,7 dB typ.

Omnisat Dish Installation

Omnisat Dish Installation

 

 Send this page address - CLICK HERE - to a friend !

DOWNLOAD Instructions for installing an earlier (manually operated) Omnisat dish (small 32k PDF file).

 

Windows users should "right click" a DOWNLOAD link above and choose "save target as" to save the PDF file without launching Acrobat Reader. If you "left click" then Acrobat Reader may launch and act as a "helper" for your browser, preventing the file from being saved in its original form. Mac Users should "ctrl-click" and select "save linked file as" (or similar).

If you do not have "Acrobat Reader" you will also need to download that from here:-
http://www.adobe.com/products/acrobat/readstep.html Free

©2004-2011 SatCure